Formlabs Form Wash L (2nd Generation)
FormLabs

Formlabs Form Wash L (2nd Generation).

SKU FHL-WA-02
Price on application

Automatically cleans large or high-volume batches of resin 3D printed parts with IPA or alternative solvents.

This one's priced per practice. Tell us what you're setting up and a person will come back with a real number, fast.

Formlabs Form Wash L (2nd Generation)

Big batches,washed automatically.

Form Wash L automatically cleans large parts or big batches of resin 3D printed parts with IPA or alternative solvents. Wash one Form 4BL build platform or two Form 4B build platforms, and it raises the parts out of the solvent to air dry.

43 L
Wash bucket, in a floor-standing unit
1 or 2
Build platforms: one Form 4BL, or two Form 4B
5 min
Formlabs' wash time for Precision Model and Fast Model Resin
29.6 cm
Maximum part height, in a 35.3 x 20 cm footprint
Form Wash L with the lid open and two build platforms of dental models mounted side by side

One size fits all

Adjustable platform mounts, configurable at various heights and widths, take one Form 4BL build platform, or two Form 4B build platforms side by side. Or take the parts off and wash them in the basket.

  • Also takes Form 4L, Form 4, Form 3 series and Form 2 build platforms
  • Mount positions for a full bucket, or one about half full at roughly 20 L
Looking down into Form Wash L: solvent in the bucket and the touchscreen showing a wash timer

Set it and forget it

Select your material from a list and Form Wash L cleans your parts for the appropriate time. Use the pre-programmed wash settings, or save your own frequently used custom profiles.

  • A touchscreen shows wash cycle information, settings and error messages
  • Wi-Fi or Ethernet, for firmware updates
Formlabs Form Wash L with the lid open and rows of dental arch models raised above the basket

Informed maintenance

An embedded solvent monitor measures how much resin is dissolved in the solvent, and with the cycle counter, tells you when it's time to replace it.

  • An electric siphon pump for filling and draining, stored under the wash bucket
  • Included: wash bucket, wash basket, electric solvent pump, flush cutters, rinse bottle and gloves
Form Cure L curing dental arches under purple light in front of an open Form Wash L

The Form 4BL ecosystem

Form Wash L sits between Form 4BL and Form Cure L, the three units Formlabs pairs for high-volume dental production.

The workflow

Scan, design, print, wash, cure.

Every case runs through the same five steps. Here is where the Form Wash L sits, and the Formlabs units it works with.

  1. 01 · Scan
    Intraoral scanner

    Capture the case digitally, chairside.

    See scanners
  2. 03 · Print
    Formlabs Form 4BL

    Formlabs' large-format dental 3D printer.

    See it
  3. 05 · Cure
    Formlabs Form Cure L

    Large-format post-curing with heat, 405 nm light and validated settings.

    See it

Specifications

Washing
Magnetically coupled impeller; parts raised out of the solvent to air dry
Build platforms
One Form 4L or 4BL, or two Form 4 or 4B, on adjustable mounts
Printers
Form 4L, Form 4BL, Form 4, Form 4B, Form 3L, Form 3BL, Form 3/+, Form 3B/+, Form 2
Solvents
IPA, TPM, Formlabs Resin Washing Solution
Bucket volume
43 L
Maximum part size
35.3 x 20 x 29.6 cm
Controls
Touchscreen, pre-programmed settings and custom profiles, solvent monitor
Included
Wash bucket, wash basket, electric solvent pump, flush cutters, rinse bottle, gloves
Power
220 to 240 VAC, 50 to 60 Hz, 1 A
Operating temperature
18 to 28°C
Size (W x D x H)
78 x 46 x 67 cm; 113 cm tall with the lid open
Access space (W x D x H)
100 x 120 x 120 cm
Weight
56.7 kg without solvent

Questions

Which build platforms does it take?

One Form 4BL or Form 4L build platform, or two Form 4B or Form 4 build platforms, on adjustable mounts. You can also take the parts off and wash them in the basket.

How much solvent does it need?

The wash bucket holds up to 43 L, and Formlabs suggests having at least 43 L of your solvent ready before the unit arrives. The mounts also work with the bucket about half full, at roughly 20 L.

Can I wash biocompatible parts in it?

Follow the washing notes in the resin's Manufacturing Guide. Formlabs also says to keep a separate wash bucket for resins used in biocompatible applications.

Who installs and supports it?

Andarsyn. We install it at your practice or lab, set it up and walk your team through the first print before we leave, and a person answers the phone after.

Product information and images: Formlabs. Sold, installed and supported in Australia by Andarsyn.

Next step

Talk to us about the Form Wash L.

We install it alongside your printer and walk your team through the first wash. Tell us what you're setting up and a person will come back with a quote.